Ultrasonic Humidifier Vibrating
Diaphragm Piezoelectric Transducer 25 mm 1.7 MHz Wired – Brand New International
buyers: Please note the International Shipping Risk shown below very
carefully before placing your order. Type
: Piezoelectric Transducer Brand: BT Identification:
BT86 (The numerals 86 represent
a production lot number that may change with production) Conditions: Brand
new; never used; never soldered; photos are of an actual item. Dimensions: With
rubber grommet seal attached – 30 mm (Diameter) x 6 mm (Thick) With
rubber grommet seal detached – 25 mm (Diameter) x 1.2 mm (Thick) Lead Length:
Approximately 75 mm Rubber Grommet Seal Color:
Black (or White) Resonant Frequency: 1.70 ± 0.05
MHz (please make sure this is the correct frequency for your equipment) Protection: The front surface
of the transducer is coated with a glass composite glaze that is superior in resisting
various common corrosive impurities; the coating is also anti-oxidation with a
long lasting life. Resonant Impedance: ≤2.0
ohms Static Capacitance: 1700 ± 20%
pF Electrical-mechanical Coupling Coefficient: ≥0.45 Average Life: 5000 Hours Applications: Commonly used
in most, if not all, portable ultrasonic humidifiers and fog/mist generators. Ultrasonic Humidifier
(or Fog/Mist Generator) Basics An ultrasonic humidifier (or fog/mist generator) utilizes a
ceramic vibrating diaphragm (piezoelectric transducer) in an oscillator circuit
to mechanically vibrate at an ultrasonic frequency to create water
droplets in the form of cool mist. 1.7
MHz is the most common frequency used for portable plug-in-the-wall-type
humidifiers; lower frequencies such as 110 KHz and 150 KHz are usually used for
low voltage 5 to 12 VDC ultra mini models; other frequencies such as 2.0 MHz,
2.4 MHz, 2.5 MHz, 2.8 MHz and 3.0 MHz are mainly used for medical and
specialized equipment. The mist usually
gets forced out by a fan, while some ultra mini models have no fans are meant
mainly for personal use. The
mechanically generated water droplets of the cool mist are about one to five microns
in diameter and are quickly evaporated into the air flow. Unlike humidifiers that boil water, these
water droplets will contain any impurities that are in the water tank,
including minerals from hard water which then form a
difficult-to-remove sticky white dust on nearby objects and furniture. Any pathogens growing in the stagnant tank
will also be dispersed into the air.
Ultrasonic humidifiers should be cleaned regularly with a soft cloth to
remove sediments and to prevent bacterial contamination from being spread
throughout the air; never scrape or scratch on the diaphragm disc. The amount of minerals and other materials can be greatly
reduced by using distilled water, though no water is absolutely pure. Special filters and disposable demineralization
cartridges may also be used to reduce the amount of airborne material. Ceramic vibrating diaphragms are consumable components, meaning
that their performance will deteriorate with usage. The average life of a ceramic vibrating
diaphragm is about 5000 hours. Using
distilled water helps to maximize the performance and operating life of the
diaphragm; use only cool water below 100 °F; the
diaphragm relies on the water for cooling, never run the diaphragm dry without
water as it will burn out very quickly; it is
also recommended that the humidifier be operated no more than 10 hours per day. A ceramic vibrating diaphragm works only in a properly functioning
oscillator circuit, it will not work by simply applying a voltage to it. Most ultrasonic humidifier
problems (low or no mist) are related to deteriorated ceramic vibrating
diaphragms and if the ultrasonic humidifier still cannot generate a reasonable
mist after replacing the diaphragm, then the associated electronic assembly
should be diagnosed, repaired or replaced.
A sample humidifier circuit diagram is provided in the photos that may
help to troubleshoot a defective humidifier. Ceramic vibrating diaphragms are fragile and can be broken
easily; they should be handled with care.
It is also important to know that wires cannot be soldered to a ceramic
disc and if so attached, they were soldered utilizing special soldering
technique; excessive heat from soldering will damage the disc. Payments: Through Paypal only Shipping: Free standard shipping to US addresses;
international shipping cost and other method of shipping are additional. By using the Shopping Cart, different items
can be combined into a single shipment. The shipping costs are set by the United States Postal Service
(USPS); no other fees are added. INTERNATIONAL SHIPPING RISK – The USPS First Class Package International service is the lowest cost
but provides no insurance coverage and no compensation for any damage, loss,
delayed delivery or non-delivery of your package; the USPS also will not accept
any inquiry regarding your package; tracking of your package also may or may
not be updated by the USPS and the postal system of your country. You have three choices for shipping
service and your package will be shipped with the service you select.
While the risk of the First Class Package International service is low, the
risk does exist. I, the seller, will not and cannot be responsible for
any loss resulting from your selection of the USPS First Class Package International
service and if you, the buyer, cannot accept this risk, then please select one
of the other two Priority services that provide expedited delivery and
insurance coverage of up to US$200; the Express service also provides guaranteed
delivery by a certain date (only to some countries and with uncontrollable
exceptions such as bad weather, civil unrest, etc.). International Buyers: Import
duties, taxes, and charges are not included in the item price or shipping
cost. Buyer is responsible for these
charges. Please check with your
country's customs office to determine what these additional costs, if any, will
be prior to bidding or buying. International Shipping Cost:
International buyers please check out your shipping cost for purchasing
more than one item on the same order. By
using the Shopping Cart, different items can be combined into a single shipment. Your savings may be significant. Prior
to shipping: These transducers are brand
new and for added assurance, they will be verified to be in good working
condition in an actual 1.7 MHz oscillator circuit similar to the sample circuit
shown in the photos. Returns: Items must be unused, unaltered and not
soldered; buyer pays return shipping; original free shipping cost will be
deducted from refunds for US buyers; international and other method of shipping
cost will not be reimbursed. Exchanges: No exchanges.
Returns Accepted for this item if it's within 30 Days